Type Multi-format LCD monitor
Screen Size 17 inches, 419.7 mm measured diagonally
Aspect Ratio 16:10
LCD Panel Active matrix TFT
Effective Screen Size (W x H) 365.8 x 205.7 mm (14-7/16″ x 8-1/8″)
Pixels (resolution) 1920 x 1200
Display Colours 1.073 billion
Viewing Angle (typ.)
Horizontal / Vertical 178° / 178°
Brightness (typ.) 450 cd/m2
Contrast Ratio (typ.) 1500:1
Applicable Standard 3G SDI: SMPTE424M/SMPTE425M; DUAL LINK HD SDI: SMPTE372M; HD SDI: BTA S-004C, SMPTE292M; SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525; EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio Output Internal: 1.0 W + 1.0 W (L/R)
Environmental Conditions Operating temperature: 5°C to 35°C (41°F to 95°F), Operating humidity: 20% to 80% (non condensing)
Storage temperature -20°C to 60°C
Energy Efficiency Class D
Power Requirements
AC 120 V/220 V – 240 V, 50/60 Hz
DC —
Rated Current
North America 0.55 A (AC 120 V)
Europe 0.33 A (AC 220 – 240 V)
DC —
Power Consumption
On-mode 29.7 W
Stand-by mode 0.30 W
Annual Energy Consumption* 44 kWh/year
Dimensions (WxHxD) with stand excluding protrusions 430 x 349.6 x 212.9 mm (16-15/16″” x 13-13/16″” x 8-7/16″”)
Dimensions (WxHxD) without stand 430 x 309 x 102 mm (16-15/16″” x 12-3/16″” x 4-1/16″”)
Weight with stand 8.3 kg (18.3 lbs)
Weight without stand 5.9 kg (13 lbs)
Provided Accessories AC power cord x1 (only for N.America), ßAC power cord x2 (only for Europe), power cord holder x 1, screw x 2 (for power cord holder), instruction manual x 1, core filter x1 (only for N. America), CD-ROM (instructions PDF file) x 1 (only for Europe)
*Annual energy consumption figures are based on the power consumption of the monitor operating 4 hours per day for 365 days. The actual energy consumption will depend on how the monitor is used.
Input/output connectors
Video
3G/HD/SD SDI (OUT 2: SWITCHED OUT) Digital signal output (compatible with EMBEDDED AUDIO signals): 1 line switched out, BNC connector x 1
3G/HD/SD SDI (OUT 1) Digital signal output (compatible with EMBEDDED AUDIO signals): 1 line, BNC connector x 1
3G/HD/SD SDI (IN 1)
3G/HD/SD SDI (IN 2) Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals): Auto detection, 2 lines, BNC connector x 2
Component(Y, PB/B-Y, PR/R-Y) IN: 1 line; BNC connector x 3, Y: 1V (p-p), 750 (with sync);PB/B-Y, PR/R-Y: 0.7 V (p-p), 750
HDMI IN x1 (compatible with HDCP)
VIDEO Composite video signal Input/output: 1 line; BNC connector x 2,1V (p-p), 750 (IN and OUT are connected with a bridge connection. Auto termination.)
Audio
Audio Assign (IN 1)
Audio Assign (IN 2) Analog audio signal input: 2 lines, RCA connector x 2, 3.5mm diam. stereo mini jack x 1, 500 mV (rms), high impedance
Audio Assign (MONITOR OUT) Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)
External Control
MAKE/TRIGGER RJ-45 terminal x 1 (8 pin)
RS-485 RJ-45 terminal x 2 (IN/OUT) (8 pin)
RS-232C D-sub 9 pin x 1
JVC DT-V17G25 17″ Multi Format LCD Monitor
$0.00
The DT-V17G25 is a near EBU Grade 1 LCD monitor with outstanding colour gamut, gamma and grayscale characteristics suitable for field, studio and broadcast image evaluation. Its 10-bit panel and wide gamma range make it ideal for critical image evaluation. The monitor is fully capable of displaying 2048 x 1080/24p (DCI 2K) signal
17-inch class (16.5-inch viewable) 10-bit IPS panel with 1.073 billion colour reproduction
High 1500:1 Contrast Ratio
Full HD resolution: 1920 x 1080 pixels
Fully capable of displaying 2048 x 1080/24p (DCI 2K) signal
Built-in Histogram, Waveform, Vector Scope, Zebra
Built-in Audio Level Meter up to 16ch
Lissajous audio metering
3 Gamma Preset Modes
Wide array of markers and indicators
Two 3G-SDI & Dual Link inputs
IMD (in monitor display)
Optimised I-P conversion
Supports the EIA/CEA-708 and EIA/CEA-608 SDI closed captioning standards
Colour Temperature settings (9,300K, 6,500K, 5,600K or User mode)
IP modes: Normal, Field, and Cinema (24p)
Pixel-by-pixel (1:1) display
Time code display (SDI)
Built-in stereo speaker
