Antenna Ports Transmitter: 2 x RP-SMA
Receiver: 5 x RP-SMA
Video Transmitter: 1 x HDMI Type A Input
Transmitter: 1 x BNC (3G-SDI/HD-SDI/SD-SDI) Input
Transmitter: 1 x BNC (3G-SDI/HD-SDI/SD-SDI) Loop Output
Receiver: 1 x HDMI Type A Output
Receiver: 2 x BNC (3G-SDI/HD-SDI/SD-SDI) Output
Embedded Audio HDMI/SDI: 2-Channel
Audio Transmitter: 1 x 1/8″ / 3.5 mm Input
Power Transmitter/Receiver: 1 x 4-Pin LEMO Input
Other I/O Transmitter/Receiver: 1 x Mini-USB
Encryption 128-Bit AES
Wireless
Wireless Range 2000′ / 609.6 m (Line-of-Sight)
Channel Bandwidth 40 MHz
Frequency Range 5.1 to 5.9 GHz
Latency < 1 ms
RF Power < 18 dBm
RF Sensitivity -75 dBm
Wi-Fi None
Format Support
Video Format HDMI/SDI
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480p: 60
576p: 50
Audio Format 2-Channel 24-Bit 48 kHz
Timecode No
Power
DC Input Power 7 to 36 VDC
Battery Type Receiver: 1 x Gold Mount (Interchangeable Mount)
Power Consumption Transmitter: 9 W
Receiver: 8 W
Mounting
Mounting 1/4"-20 Female
Environmental
IP Rating None
Operating Temperature 32 to 104°F / 0 to 40°C
General
Dimensions Transmitter: 4.6 x 2.7 x 1" / 11.7 x 6.9 x 2.5 cm, Excluding Antenna
Receiver: 6.2 x 4 x 1" / 15.7 x 10.2 x 2.5 cm, Excluding Antenna
Weight Transmitter: 11 oz / 312 g
Receiver: 18.3 oz / 519 g
Hollyland Cosmo 2000 Wireless Camera Kit
$0.00
The Hollyland Cosmo 2000 allows you to transmit an HDMI/SDI signal up to 2000′ to an HDMI or dual SDI outputs. The transmitter/receiver set supports up to 1080p60 signals with a latency of 1 ms. The transmitter also offers an SDI loop-through output and 3.5mm stereo audio input. The system operates on the 5.1 to 5.9 GHz frequency band and is encrypted to prevent video leakage—only the matched receiver shows clear images; unmatched receivers are unable to, even when on the same frequency. One of the outstanding features of this Cosmo 2000 is a built-in software optimization for use with the ARRI ALEXA Mini. The Cosmo 2000 was designed to successfully handle playback on the ALEXA Mini without waiting. Other features include an OLED screen and a smart cooling fan that automatically kicks in whenever the temperature reaches extreme highs.
The transmitter is designed to be powered via its 4-pin LEMO connector only, and the receiver features a Gold mount battery plate and a 4-pin LEMO connector. Two D-Tap to LEMO cables are included to provide the flexibility to power both units via a cable connection to compatible batteries. The transmitter uses two antennas and the receiver five antennas.
